Major leaks are easy to detect because they usually leave a puddle somewhere in or around your house. However, slow water leaks can be difficult to find because they involve smaller amounts of water. If you suspect a leaky pipe, your first step is to confirm the leak. Then, it’s time to check the likeliest trouble spots. If that doesn’t help, you’ll need a plumber who has experience in plumbing and main water line repair in Powder Springs, GA.

Confirm the Leak

If you have a water leak, you should be able to confirm it by using your water meter. To do that, you must turn off any appliances that use water and instruct your family not to turn on the sinks or flush the toilets. Next, you need to check your main water meter. If the meter is spinning even though you’re not using any water, there is a big leak somewhere. However, if you suspect a smaller leak, you may want to record the numbers or location of the dial and wait a few hours. You could do this before going to work. When you come back to check the meter and you notice that is has moved even though nobody has been using water, then you have confirmed that there is a leak in the plumbing system.

Check the Toilet

Toilets are the biggest culprits for plumbing leaks. People get used to the noise of water running in the toilet after they flush, which is why a small trickle can escape them. To check for leaks, just put a drop or two of food coloring into the tank after it has filled back up. If the water in the bowl is also colored 30 minutes later, then you have found the source of the problem.

Look under the Sink

The piping under your sink is vulnerable to getting dented or hit because these areas tend to double as storage room. Fortunately, most of it is visible and can be repaired easily. To find out if the pipes under your sinks are leaking, you can clear out the space and put down some paper towels. If they feel damp or wet after an hour or so, then the pipe is leaking.

Move Big Appliances

Minor leaks can also occur near your major appliances and go unnoticed for a while. For example, there could be leak in the pipe that leads to your dishwasher, fridge, washer, or hot water tank. You may have to move the appliance to find out for sure, but if it has been leaking, you’ll notice that the floor is moist to the touch. Depending on how long it has been leaking, there may also be signs of mold or mildew on the walls or floors next to the appliance.

When You Need Help

Small leaks are difficult to detect because many of the pipes in your home are underneath the floors or behind walls. If you can figure out the general proximity of the leak, that can help your plumber do the rest. Otherwise, a plumbing professional can bring a small camera and run it along the piping in question to find a leak. They also have other equipment to detect moisture along the floor or walls, which will be present if there has been a leak.